AS-614
Indoor position, occupancy, and closest-person vital-sign sensing on a compact 1 TX / 4 RX radar module.
Choose Your Sensing Guide
Start with the required measurement task. Confirm firmware and licensed options before using Modes 10-13.
Track Position
Configure wall and ceiling coordinates, distance or zone output, sensitivity, and static-object detection.
Open Guide →Estimate Occupancy
Use wall or ceiling installation to report an approximate total or a nine-zone distribution.
Open Guide →Read Closest-Person Vital Signs
Interpret heart rate, breathing, waveform, position, and optional HRV output for the closest detected person.
Open Guide →Explore Licensed Modes
Review raw antenna data, advanced vital signs, restroom sensing, and hospital-bed workflows.
Open Guide →Connect Your Host
Integrate the ASCII UART protocol and check GPIO, reset, timing, and USB-C power requirements.
Open Guide →
From Connection to Sensor Data
Know Your Module
Review hardware, connectors, modes, and documented limits.
Read Guide →02Make the First Connection
Connect power and UART, query firmware, and observe Mode 1 packets.
Read Guide →03Interpret the Output
Use the documented commands, response framing, and mode-specific packet layouts.
Read Guide →