Getting Started

New to KORLINX products? These guides walk you through everything from unboxing to your first data transmission.

What You'll Need

• A KORLINX module or evaluation kit
• USB-A to USB-C cable (or UART-to-USB adapter)
• Terminal emulator: Tera Term, PuTTY, or the VS Code Serial Monitor extension
• Active SIM card (for cellular products)

First Steps

1. Connect the module to your computer via USB or UART
2. Open a serial terminal at the module's default baud rate (typically 115200)
3. Send AT — the module should respond OK
4. Configure your APN and network settings
5. Test connectivity with AT+PING

note

Network attach steps vary by product. Refer to your product's Network Attach document for the basic connectivity guide.

---

Guides

info

Coming Soon Step-by-step getting started guides for each product are in development. See individual product Quick Start pages for now.